Top quality panel radiator, made of microalloyed steel sheet, intended for installation in closed thermal installations (under pressure), with the possibility of lateral connection, on the left or right side.
A radiator with excellent thermal and mechanical characteristics!
You can choose the color and design that suits your space.
The anti-corrosion protection of the surface means that you can forget about them for at least 15 years!
Sheet steel radiators Radik Klasik are heaters in the form of steel plates with natural air circulation around the radiation surface. They are intended for installation in central heating systems, closed, monotubular or bitubular, with forced circuit.
Surface finish
Radik Klasik radiators are made in three main phases:
1. Preparation
steel surface - contains degreasing, phosphating and body washing
the radiator;
2. The application of the basic cataphoretic varnish- is used a
progressive immersion technology in a cataphoretic lake bath (KTL). The layer of
applied varnish is evenly distributed at the molecular level throughout the body
the radiator. The technology used is 4th generation. Mechanical properties
and final KTL paint chemicals are obtained in the drying oven. This phase
of the surface finish is decisive for the reliability and duration of
operation of the radiator;
3. Application of the final layer of paint: se
uses an epoxy-polyester paint sprayed evenly by robots.
After solidifying the paint in the oven, followed by cooling, the finishing process
of the radiator surface is completed.
The standard color is white
RAL 9016. Colored radiators selected from
the Korado color palette. To view the Korado color palette, please
“click here”.
Very important!
• Oxygen dissolved in
the water circulating through the radiator is particularly corrosive! For this reason, at
the execution of the heating installation will use materials that do not allow diffusion
oxygen.
• The radiators will not be installed in installations with an expansion tank
open or which are temporarily emptied. Dissolved oxygen is not allowed to exceed
the concentration of 0.1mg/l and the PH of the thermal agent must be between 8.5 -
9.5.
• To ensure optimal operating conditions and maximum efficiency
recommends mounting the radiators under the windows, symmetrically on their axis, keeping a
distance of 50-100 mm below the parapet and above the floor.
In the production process a
Radik Klasik radiators use high-quality microalloy steel
purchased from reputable European steel producers.
During use, radiators do not require special maintenance. Cleaning of external surfaces can be done with detergents usually used in a household and soft wipeable textiles. The detergent used must not be abrasive and not chemically aggressive (neither strongly alkaline nor acidic).
The quality of Korado radiators is guaranteed by the ISO9001 integrated quality management system. The radiators are manufactured according to the European standard EN442 and are CE certified.
Each Radik Klasik radiator is individually wrapped in polyethylene film, cardboard and plastic cornering to be properly protected during storage, transport and assembly, including the pressure test. The multifunctional packaging is designed in such a way that the radiator can be mounted in the installation without opening the packaging and during any construction work it can thus be kept clean. DO NOT unpack until after the painters have left!
-
Radik Klasik radiators are mounted using the mounting kit included in
standard delivery
- maximum working pressure: 10 bar
- thermal agent
used: water or aqueous solutions with a maximum operating temperature of
110°C
- the volume of water being reduced from the radiator, allows a flexible reaction a
the heating system to the heat requirement of the heated room, as well as o
effective thermoregulation.
Thermal power:
| P (Watt) | t1 | t2 | ti | Δ T |
|---|---|---|---|---|
| 902 | 75 | 65 | 20 | 60 |
| 1145 | 90 | 70 | 20 | 60 |
*t1 = heating agent flow temperature °C
*t2 =
heating agent return temperature °C
*t2 = room air temperature °C
Ways to connect:
The wall mounting kit is free and consists of two brackets, two plastic dowels and two screws with the addition of a plug and manual breather, all required for installation.
| Height H | Length L |
| 600 mm | 900 mm |
| Connection quota | h = H - 54mm |
| Connection | 4x G1/2" internal thread |
| Maximum permissible pressure | 10 bar |
| Maximum permissible temperature | 110 °C |
| Ways to connect | Left or right side |
Data sheet
Top quality panel radiator, made of microalloyed steel sheet, intended for installation in closed thermal installations (under pressure), with the possibility of lateral connection, on the left or right side.
Top quality panel radiator, made of microalloyed steel sheet, intended for installation in closed thermal installations (under pressure), with the possibility of lateral connection, on the left or right side.
Top quality panel radiator, made of microalloyed steel sheet, intended for installation in closed thermal installations (under pressure), with the possibility of lateral connection, on the left or right side.
Română
