RADIATOR KORADO RADIK KLASIK ¬ RK 22 600/700

Surface finish Radik Klasik radiators are made in three main phases:
1. Preparation steel surface - contains degreasing, phosphating and body washing the radiator;
2. The application of the basic cataphoretic varnish- is used a progressive immersion technology in a cataphoretic lake bath (KTL). The layer of applied varnish is evenly distributed at the molecular level throughout the body the radiator. The technology used is 4th generation. Mechanical properties and final KTL paint chemicals are obtained in the drying oven. This phase of the surface finish is decisive for the reliability and duration of operation of the radiator;
3. Application of the final layer of paint: se uses an epoxy-polyester paint sprayed evenly by robots. After solidifying the paint in the oven, followed by cooling, the finishing process of the radiator surface is completed.

The standard color is white RAL 9016. Colored radiators selected from the Korado color palette. To view the Korado color palette, please “click here”.
Very important!
• Oxygen dissolved in the water circulating through the radiator is particularly corrosive! For this reason, at the execution of the heating installation will use materials that do not allow diffusion oxygen.
• The radiators will not be installed in installations with an expansion tank open or which are temporarily emptied. Dissolved oxygen is not allowed to exceed the concentration of 0.1mg/l and the PH of the thermal agent must be between 8.5 - 9.5.
• To ensure optimal operating conditions and maximum efficiency recommends mounting the radiators under the windows, symmetrically on their axis, keeping a distance of 50-100 mm below the parapet and above the floor.

In the production process a Radik Klasik radiators use high-quality microalloy steel purchased from reputable European steel producers.
During use, radiators do not require special maintenance. Cleaning of external surfaces can be done with detergents usually used in a household and soft wipeable textiles. The detergent used must not be abrasive and not chemically aggressive (neither strongly alkaline nor acidic).

The quality of Korado radiators is guaranteed by the ISO9001 integrated quality management system. The radiators are manufactured according to the European standard EN442 and are CE certified.

Each Radik Klasik radiator is individually wrapped in polyethylene film, cardboard and plastic cornering to be properly protected during storage, transport and assembly, including the pressure test. The multifunctional packaging is designed in such a way that the radiator can be mounted in the installation without opening the packaging and during any construction work it can thus be kept clean. DO NOT unpack until after the painters have left!

- Radik Klasik radiators are mounted using the mounting kit included in standard delivery
- maximum working pressure: 10 bar
- thermal agent used: water or aqueous solutions with a maximum operating temperature of 110°C
- the volume of water being reduced from the radiator, allows a flexible reaction a the heating system to the heat requirement of the heated room, as well as o effective thermoregulation.
Thermal power:

*t1 = heating agent flow temperature °C
*t2 = heating agent return temperature °C
*t2 = room air temperature °C

Ways to connect: